Authorized Penntek Dealer · Rapid City, MI & northern Michigan
Floors Built With
Integrity.
THE CONCRETE COATING EXPERTS — residential and commercial Penntek coating systems engineered for northern Michigan winters.
See The Difference
Before & After
Rapid City, MI · Workshop garage · Penntek flake system. Drag the slider.
Placeholder -- Residential garage floor
Residential
Garages, Basements & Patios
Durable Penntek coating systems for garage floors, basements, patios and pool decks built to handle Michigan winters.
Explore Residential →Placeholder -- Commercial warehouse floor
Commercial
Warehouses, Retail & Industrial
Heavy-duty polyurea and epoxy systems for warehouses, retail floors, automotive facilities and light industrial spaces.
Explore Commercial →Why Integrity
A Process Built On Prep, Not Shortcuts
Every Integrity floor goes through the same disciplined sequence — here’s what actually happens on your slab.
01
Mechanical Surface Prep
We diamond-grind the existing concrete to open the surface profile so the coating system has a mechanical bond to work with, rather than relying on paint sitting on top of the slab.
02
Crack & Joint Repair
Cracks, spalls and control joints are repaired and filled before any coating goes down, so the finished floor isn’t hiding problems underneath it.
03
Base Coat Application
A Penntek base coat is applied across the prepped slab, forming the foundation layer the rest of the system is built on.
04
Flake Broadcast
Decorative vinyl flake is broadcast into the wet base coat to your chosen blend, adding texture, hiding minor surface imperfections, and giving the floor its finished look.
05
Scrape & Vacuum
Once cured, excess flake is scraped smooth and the entire floor is vacuumed clean, preparing a flat, even surface for the topcoat.
06
Clear Topcoat Seal
A clear protective topcoat is rolled over the flake layer to seal the system and give the floor its final sheen and cleanability.
Why It’s Worth Doing Right
A Real System, Not A Coat Of Paint
A cheap kit and a professionally installed Penntek system can look similar in a photo. What actually happens to the concrete underneath is not the same.
DIY Kit / Paint-Over
Integrity Penntek System
Surface prep
Cleaned or lightly etched
Diamond-ground to open a real mechanical bond
Cracks & joints
Coated over as-is
Repaired and filled before any coating goes down
Coating system
Single coat of paint or thin epoxy
Base coat + flake broadcast + clear protective topcoat
Bond to concrete
Sits on top of the slab
Mechanically bonded into a ground surface profile
Who installs it
DIY weekend project
Trained crew, authorized Penntek dealer
From Start To Finish
The Install Sequence
- 1 Inspect On-site evaluation of the slab, moisture and existing damage.
- 2 Prepare Diamond-grind the surface to open a proper profile.
- 3 Repair Fill cracks, spalls and joints before coating.
- 4 Coat Apply the Penntek base coat system.
- 5 Broadcast Broadcast your chosen flake blend into the base coat.
- 6 Protect Seal with a clear topcoat for the finished floor.
Color & Flake Visualizer
Preview Your Blend
Real Penntek flake blends across all four lines we install — pick a filter, tap a swatch to see the actual product up close.
Project Gallery
Recent Work
A first look at real Integrity installations. More projects will be added here as they're completed.
Entryway & Mudroom Transformation
Multi-Bay Garage & Gear Room
Reviews
From The Field
Verified customer reviews from Integrity’s own site. More will be added here as new jobs are completed.
“Being an outdoorsman, my family is constantly tracking in mud and abusing our entry way floor. We put down the Penntek flake system and it has been the best decision, the floor is so easy to clean and hides the dirt. Still feels like a part of the home with concrete floors. Love it!”
“Adam Hofer and his team did an EXCEPTIONAL JOB in our lake house walk-out basement.”
“I had the ugly deeply pitted garage floor. It’s like magic seeing the new floor.”
Built For Michigan
What Northern Michigan Floors Are Up Against
General educational information — not a performance guarantee for any specific project.
Freeze-Thaw Cycles
Northern Michigan winters put concrete through repeated freeze-thaw cycles. A properly prepped and coated surface is designed to help protect the slab underneath from that stress.
Road Salt & De-Icers
Vehicles tracking in road salt and de-icing chemicals through the winter can be hard on bare concrete over time. A sealed coating system gives you a barrier to wipe or hose off instead.
Moisture & Humidity
Garages and basements deal with melting snow, humidity and general moisture. A coated floor is easier to keep clean and dry than bare, porous concrete.
Hot Tires
Summer driving can leave tires hot enough to affect some coatings. Penntek systems are formulated with this kind of everyday use in mind.
UV Exposure
Outdoor spaces like patios and pool decks see direct sun for months at a time. Topcoat selection matters for how a coated surface holds up outdoors.
Warranty
Backed By A Written Warranty
⚠ Verification required before launch — figures below are as provided by the client and have not yet been confirmed against a signed warranty document.
Residential
15 Years
Verification required before launch
Commercial
5 Years
Verification required before launch
Service Area
Proudly Serving Rapid City & Northern Michigan
If you’re near one of these communities, we likely serve your area. Don’t see your town? Reach out anyway.
- Rapid City
- Williamsburg
- Bellaire
- Central Lake
- Torch Lake
- Charlevoix
- Boyne City
- Boyne Falls
- Petoskey
- Harbor Springs
- Wolverine
- Gaylord
- Lewiston
- Grayling
- Houghton Lake
- McBain
- Cadillac
- Reed City
- Mesick
- Manistee
- Onekama
- Frankfort
- Kalkaska
- Mancelona
- Roscommon
- Interlochen
- Traverse City
- Cedar
- Empire
- Glen Arbor
- Suttons Bay
FAQ
Common Questions
How long does a typical installation take?
Most residential garage floors are completed in a matter of days from prep through final topcoat, depending on size and floor condition. Commercial projects vary more with square footage and scheduling around your business. We’ll give you a project-specific timeline as part of your quote.
Do I need to move everything out of my garage or space first?
Yes -- the space needs to be fully cleared so we can grind, repair and coat the entire slab. We’ll walk you through exactly what to move and when as part of scheduling.
Can you coat over an existing epoxy or paint coating?
In most cases an existing coating needs to be mechanically removed first so the new system can properly bond to the concrete. We’ll assess your existing floor during your quote.
What’s the difference between epoxy and polyurea/Penntek systems?
Penntek systems are a polyurea/polyaspartic-based coating line, applied differently than traditional epoxy. As an authorized Penntek dealer, we’ll recommend the right system for your specific space and use case.
Will the floor be slippery when wet?
Flake systems and topcoat selection both affect surface texture. Talk to us about your space -- garages, pool decks and commercial areas can call for different topcoat finishes.
Ready When You Are
Let’s Talk About Your Floor.
Get a free, no-pressure quote for your residential or commercial space.